|
|||||||||||
 |
|
|
|
||||||||
E-mail the Rocketmen:Rick MentelChuck Nuffer |
|||||||||||
|
Last updated: 08/07/08 |
|||||||||||
|
|
|
|
|
|
|
 |
||||||
 |
 |
|||||
|
We decided to mount the Oil cooler to the engine mount using steel tubing and adel clamps. This worked out very well. The oil cooler shroud was fabricated in the shop and poweder coated. We will connect the rear of the baffle to the shroud using a short section of scat hose. |
||||||
 |
 |
|||||